25MPa液压平衡式手动节流阀设计论文+cad图纸+三维图+开题+任务书

中文摘要…………………………………………………………………………………..Ⅵ

1 前言………………………………………………………………………………………1

1.1阀门的分类……………………………………………………………………….2

1.2阀门的主要参数………………………………………………………………….3

2 选题背景…………………………………………………………………………………5

2.1题目来源………………………………………………………………………….5

2.2研究目的和意义………………………………………………………………….5

2.3国内外研究情况及发展趋势…………………………………………………….6

2.4本文研究的主要内容…………………………………………………………….7

3 设计论述……………………………………………………………............................…7

3.1节流阀的特点…………………………………………………………………….7

3.2节流阀的工作原理………………………………………………………………..8

3.4节流阀的结构组成………………………………………………………………..9

3.525MPa液压平衡式手动节流阀设计与计算………………………………………………........…….9

4 节流阀强度校核..............................................................................................................17

4.1阀体壁厚校核………………………………………………………...................17

4.2阀杆强度校核…………………………………………………………………...18

4.3阀座的应力校核………………………………………………………………...21

4.4阀杆螺纹的强度校核…………………………………………………………...21

5 节流口流量分析…………………………………………………………………......…22

5.1节流口的流量特性公式…………………………………………………….......22

5.2影响流量稳定性的因素……………………………………………………...…23

6 总结………………………………………………………………………………......…25

参考文献……………………………………………………………………………......…26

致谢…………………………………………………………………………………......…27

25MPa液压平衡式手动节流阀设计

[摘要]阀门作为管道的重要控制元件，广泛应用于石油、化工、冶金、天然气输送、发电站、城市供水等国民经济的各个部门。节流阀以构造较简单，便于制造和维修，成本低，更是得到广泛的应用。节流阀是钻井井控管汇中的关键设备，它根据井口压力要求可以在任何位置，它主要起节流作用，用于控制井口排出的压力和流量，以平衡地层压力。它在高压井口装置中起着非常重要的作用。筒式节流阀是节流阀中的一种，主要由阀芯和阀体组成，形成可变或非可变的节流口。可变节流口一般由可动部分（阀芯）和固定部分（阀体或阀座）相对运动来改变节流口大小。本文设计的节流阀为可调式手动节流阀，阀芯为筒式，阀芯和阀座通过相对运动形成可变节流口。筒式阀芯与顶部为圆柱形的阀杆配合，具有流体流动性能好，震动小，噪音低。阀芯末端采用楔形面和平面相结合的方式，保证流体出流方向不指向壳体，避免了流体对壳体壁的冲蚀。同时，阀芯上端部的直平面满足了对压降的线性调节要求，更适合现场使用。

[关键词]节流阀筒式阀芯节流口阀杆

[Abstract] The valve as pipeline's important controlling elementiswidely appliedin each departmentofnational economysuch aspetroleum, chemical, metallurgy, natural gas transportation, power stationandurban water supply. The throttle valveis more widely used because ofsimpleconstructs,convenientfor the manufacture and themaintenanceand low cost. Thethrottle valveisimportant equipment in the well-control header，itcan be put inany positionaccording to the pressureon the mouth of well andit is mainly used inthe throttlingwithcontrollingthepressure and volume of flowdischargedbythe mouth of well tobalance formation pressure.It is playing the very vital role in the high pressureon the mouth ofwelldevice. The barreltypethrottle valve isone kind ofthethrottle valve ,itis mainly composed of the valve core and the valve chestthatforms invariable or the non-invariable orifice. Thesize ofinvariable orificeisgenerallychanged by way ofthe relative motionwith themoving part (valve core) and the fixed part (valve chest or valve seat).The throttle valvedesigned by thearticleis adjustable andmanual, the valve core is the barrel type, the valve core and the valve seat forms the invariable orifice through the relative motion. The barreltypevalve corecooperateswiththevalve poleof cylindricaltop,whichhavegoodfluid flow performance, small vibrationandlownoise. Theend ofvalve coreis made ofthe wedge-shaped surfaceand the plane,whichguaranteethat thedirection of fluidnot todirect tothe shellandavoid erodingofthe fluid to shell’swall. At the same time,thestraight plane on the valve corehas satisfied the linear adjustment requestofpressure drop,which ismore suitableinfield.

[Keywords] Throttle valvebarrel typevalve coreorificevalve pole